Double Glazing Door Lock repairs to double glazed windows

Is your uPVC window or door mechanism not working properly? Perhaps the door or window handles don't meet up correctly or are difficult to use.

You'll be wasting energy when your double glazing windows repairs-glazed doors do not function properly. This also increases the chance of burglary. Owen the Locksmith can fix your door lock for a reasonable price.

Snapped Key

If a key is snapped off inside a lock, it could be extremely difficult. This can also be a security risk in that it can expose you to burglars if your door does not lock. There are a few easy fixes you can make to repair the issue and make your door functional again.

First, remember to stay calm. If you panic, you could end up pushing the broken key further into the lock.

Spray WD-40 or another penetrating oil, into the lock. This will assist the broken piece to be removed more easily. You can also use a screwdriver to break any pieces stuck. If you happen to have a little bit of the key hanging out it, you can use a paperclip or some other metal object that is thin to grab it and remove it. Both of these methods work, but be careful not to push the damaged piece of the key further into the keyway.

Some paperclips have grooved edges which can be used as hook extractors. Jigsaw blades can also work well for this. If you don't have any of these items you can bend a hook using needle-nosed pliers. Additionally, you can make use of a pair of tweezers to grasp and pull out the remaining pieces of broken keys.

If you can't get the broken piece of key out, try using a lock de-icer. It is available in most hardware stores and is used to freeze any moisture present within the lock.

If none of these methods seem to be helping, it might be time to call in a locksmith. Fitlocks experts can quickly fix problems such as broken handles or snapped keys using uPVC locks and door mechanisms. They can also modify your double glazing repair glazing door mechanisms to make them easier to operate. Book a double glazing repair through us online or give us a call to discuss your requirements.

Broken Cylinder

A damaged cylinder can pose a serious security threat. A professional locksmith is able to fix the cylinder. To fix the cylinder locksmiths must tap it. They can do this using the hammer or any other tools, but the most effective way is to employ a long match or a piece of wire. Place the match or wire's end in the keyway. The locksmith will hit the lock to break it open. This is better than using a hammer that could cause damage to the lock.

Overheating is the main reason behind cylinder heads cracking. This can occur when the cylinder block and cylinder head are made from different metals, including cast iron and aluminium. Different metals will heat up and cool down at different rates. This can cause localized hotspots to expand quicker than the rest of the cylinder.

Another reason that could cause cylinder cracks is corrosion. If the head and block of a cylinder are not maintained in a timely manner they may be corroded or rust and cause them to expand faster than anticipated. This could lead to cracks over time.

If your uPVC window or door lock is rigid and requires more pressure to turn it could be due to a variety of reasons. This problem can be caused by a malfunctioning locking mechanism or misalignment, or a worn-out handle.

This is a straightforward and cost-effective fix that a majority of double glazing repairs near me glazing owners can accomplish. A professional locksmith can usually solve this issue within an hour of arriving at the property. Depending on the needs of your home, they can replace the locking mechanism, replace the window handles, and change the gearboxes. A professional locksmith will be able to provide you with a recommendation on the most cost-effective solutions for your home. They can also suggest upgrades to the highest-security 3 Star TS007 euro cylinders that will add an extra layer of security against burglars. It's a small price to pay for the peace of mind that comes from knowing that your uPVC doors are secure.

Broken Handle

Window handle locks are complex mechanisms that deteriorate with age and use, so it's not a surprise that they sometimes break. It isn't easy to determine the reason for the problem and then fix it properly.

Whether the problem is in the internal locking mechanism or the latch, fixing the broken handle can improve your uPVC double glazing door's security and allow you stop draughts. It could be costly to repair or replace your handle if it is not done correctly and could also harm the frame and lock of your door.

Screwdriver: With the window open remove the screw that holds the handle. This should be located on the inside face of the back plate, which is usually concealed by an attractive cover for the screw for aesthetic reasons. It is not recommended to lose any internal components of the handle like the plates and levers on either side. Ideally, keep these in the same place so you can replace them again when needed.

Then, using another screwdriver, loosen the screw that holds the handle to the spindle in the back. Once the screw is loose, pull the handle out and remove the broken spindle. Replace it with a brand new spindle, making sure it's the same length (you can find them online or in hardware stores). Securely screw it in the correct position. Be careful not to overtighten as this could damage the handle or the window frame.

Close the handle and test it. Hopefully, it will work smoothly and you'll be able to unlock your window.

While you're working on the handle, don't forget to check your uPVC windows are closing properly. If they're not, you could experience damp and draughts inside your home as in addition to compromising your home's energy efficiency. A local window company, such as Core Sash Windows, will be able to adjust the hinges on your window frames so they are able to shut properly.

Broken Spindle

It is often the case that the spindle in a handle breaks rather than the handle itself. This is particularly common in uPVC tilt and turn windows. These windows require a handle that operates an locking device within the frame of the window. The handle is connected to a centre rod that in turn activates cams that look like mushrooms, they lock into window frame keeps. If the dead latch mechanism fails to open when the handle is turned it is possible that the spindle has been damaged and this could be a very frustrating issue.

Luckily there are steps that can be taken to rectify this issue. A professional locksmith can quickly and effectively fix this problem. They will be able to disassemble the window handle by using a tool that can remove the wheel portion of the mechanism, where the spindle is. This is done without causing any damage to the handle or causing other damage to the frame of the window.

After removing the wheel the technician can inspect the spindle and identify the reason for its break. This involves disassembling the spindle, and then examining each component, noting any damage or excessive wear. This procedure is typically carried out by technicians working in an environment that is clean.

The next step is to clean the damaged spindle. This will help remove any dirt or debris which could be hindering it from working normally. Following this, the spindle could be repaired or replaced. If the technician is replacing the spindle the dowel can be used that is the same size to the original. He will then drill matching holes into both pieces. This will ensure that the spindle fits perfectly with the handle.

If the damaged spindle is beyond repair, it could be necessary to replace it completely. Home centers can sell generic replacements but if the window design is unique, you will require contacting an expert in woodworking or cabinet making who can recreate the exact piece. Once the spindle has been installed, it can be fixed to the handle. Line up the screw holes on the handle to the existing screws in the frame. Once the new handle is in place, you'll be able to operate your uPVC window.